diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index b30b43d..2a2bffe 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -52,6 +52,13 @@
 
 if USB_EHCI_HCD
 
+config USB_EHCI_MARVELL
+	bool "Support for MVEBU (AXP / A38x) on-chip EHCI USB controller"
+	depends on ARCH_MVEBU
+	default y
+	---help---
+	  Enables support for the on-chip EHCI controller on MVEBU SoCs.
+
 config USB_EHCI_MX6
 	bool "Support for i.MX6 on-chip EHCI USB controller"
 	depends on ARCH_MX6
diff --git a/drivers/usb/host/ehci-marvell.c b/drivers/usb/host/ehci-marvell.c
index 50fa01c..5b0f46a 100644
--- a/drivers/usb/host/ehci-marvell.c
+++ b/drivers/usb/host/ehci-marvell.c
@@ -12,6 +12,7 @@
 #include "ehci.h"
 #include <linux/mbus.h>
 #include <asm/arch/cpu.h>
+#include <dm.h>
 
 #if defined(CONFIG_KIRKWOOD)
 #include <asm/arch/soc.h>
@@ -28,24 +29,19 @@
 /*
  * USB 2.0 Bridge Address Decoding registers setup
  */
-#ifdef CONFIG_ARMADA_XP
+#ifdef CONFIG_DM_USB
 
-/*
- * Armada XP and Armada 38x have different base addresses for
- * the USB 2.0 EHCI host controller. So we need to provide
- * a mechnism to support both here.
- */
-#define MVUSB0_BASE					\
-	(mvebu_soc_family() == MVEBU_SOC_A38X ?		\
-	 MVEBU_USB20_BASE : MVEBU_AXP_USB_BASE)
-#define MVUSB_BASE(port)	MVUSB0_BASE + ((port) << 12)
+struct ehci_mvebu_priv {
+	struct ehci_ctrl ehci;
+	fdt_addr_t hcd_base;
+};
 
 /*
  * Once all the older Marvell SoC's (Orion, Kirkwood) are converted
  * to the common mvebu archticture including the mbus setup, this
  * will be the only function needed to configure the access windows
  */
-static void usb_brg_adrdec_setup(int index)
+static void usb_brg_adrdec_setup(u32 base)
 {
 	const struct mbus_dram_target_info *dram;
 	int i;
@@ -53,8 +49,8 @@
 	dram = mvebu_mbus_dram_info();
 
 	for (i = 0; i < 4; i++) {
-		writel(0, MVUSB_BASE(index) + USB_WINDOW_CTRL(i));
-		writel(0, MVUSB_BASE(index) + USB_WINDOW_BASE(i));
+		writel(0, base + USB_WINDOW_CTRL(i));
+		writel(0, base + USB_WINDOW_BASE(i));
 	}
 
 	for (i = 0; i < dram->num_cs; i++) {
@@ -63,12 +59,69 @@
 		/* Write size, attributes and target id to control register */
 		writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) |
 		       (dram->mbus_dram_target_id << 4) | 1,
-		       MVUSB_BASE(index) + USB_WINDOW_CTRL(i));
+		       base + USB_WINDOW_CTRL(i));
 
 		/* Write base address to base register */
-		writel(cs->base, MVUSB_BASE(index) + USB_WINDOW_BASE(i));
+		writel(cs->base, base + USB_WINDOW_BASE(i));
 	}
 }
+
+static int ehci_mvebu_probe(struct udevice *dev)
+{
+	struct ehci_mvebu_priv *priv = dev_get_priv(dev);
+	struct ehci_hccr *hccr;
+	struct ehci_hcor *hcor;
+
+	/*
+	 * Get the base address for EHCI controller from the device node
+	 */
+	priv->hcd_base = dev_get_addr(dev);
+	if (priv->hcd_base == FDT_ADDR_T_NONE) {
+		debug("Can't get the EHCI register base address\n");
+		return -ENXIO;
+	}
+
+	usb_brg_adrdec_setup(priv->hcd_base);
+
+	hccr = (struct ehci_hccr *)(priv->hcd_base + 0x100);
+	hcor = (struct ehci_hcor *)
+		((u32)hccr + HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
+
+	debug("ehci-marvell: init hccr %x and hcor %x hc_length %d\n",
+	      (u32)hccr, (u32)hcor,
+	      (u32)HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
+
+	return ehci_register(dev, hccr, hcor, NULL, 0, USB_INIT_HOST);
+}
+
+static int ehci_mvebu_remove(struct udevice *dev)
+{
+	int ret;
+
+	ret = ehci_deregister(dev);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static const struct udevice_id ehci_usb_ids[] = {
+	{ .compatible = "marvell,orion-ehci", },
+	{ }
+};
+
+U_BOOT_DRIVER(ehci_mvebu) = {
+	.name	= "ehci_mvebu",
+	.id	= UCLASS_USB,
+	.of_match = ehci_usb_ids,
+	.probe = ehci_mvebu_probe,
+	.remove = ehci_mvebu_remove,
+	.ops	= &ehci_usb_ops,
+	.platdata_auto_alloc_size = sizeof(struct usb_platdata),
+	.priv_auto_alloc_size = sizeof(struct ehci_mvebu_priv),
+	.flags	= DM_FLAG_ALLOC_PRIV_DMA,
+};
+
 #else
 #define MVUSB_BASE(port)	MVUSB0_BASE
 
@@ -112,7 +165,6 @@
 		writel(base, MVUSB0_BASE + USB_WINDOW_BASE(i));
 	}
 }
-#endif
 
 /*
  * Create the appropriate control structures to manage
@@ -142,3 +194,5 @@
 {
 	return 0;
 }
+
+#endif /* CONFIG_DM_USB */